| P40340 | 160 oz - Gun Foam with Accessories | Important Requirement Respirator Masks are required when applying two-component spray foam insulation. A mask with organic vapor filters and a prefilter for particulates is required. | Product Description: 40 Series Gun Foam with Accessories can be ordered either with or without hoses and applicators. Providing the most efficient application for large projects, cylinder foam is often chosen by professionals over straw or gun foam. Handi-Foam® Cylinder Foam, like our straw foams, is tack free in less than 10 minutes and fully cured in approximately one hour.
. **These canisters are basically large cans of one-component straw foam. They come with a 9½' hose and brass applicator tip. The option is the brass fitting can be replaced with hose and adapter ($20.08-#F61125) that allows the hose to be fitted to the bottom of the Convertible dispensing unit gun (#F61110) above. For better controlled application, coverage and continuous use of these canisters by a tradesman, the gun & conversion kit is recommended. One time users are fine with the way it comes and don't need to order the dispensing gun. Typical Applications: • Air Sealing in New Construction and Retrofit • Filling gaps around pipes • Filling cracks & voids • Any application where you would use a lot of canned straw foam | P40340 160 oz. Approx. Yield - Bead Size | 1/4" | 3/8" | 1/2' | | 19,572 ft. | 8,688 ft. | 4,887 ft. | $88.00 each |
| P40540 | 260 oz - Gun Foam with Accessories | Important Requirement Respirator Masks are required when applying two-component spray foam insulation. A mask with organic vapor filters and a prefilter for particulates is required. | Product Description: 40 Series Gun Foam with Accessories can be ordered either with or without hoses and applicators. Providing the most efficient application for large projects, cylinder foam is often chosen by professionals over straw or gun foam. Handi-Foam® Cylinder Foam, like our straw foams, is tack free in less than 10 minutes and fully cured in approximately one hour.
. **These canisters are basically large cans of one-component straw foam. They come with a 9½' hose and brass applicator tip. The option is the brass fitting can be replaced with hose and adapter ($20.08-#F61125) that allows the hose to be fitted to the bottom of the Convertible dispensing unit gun (#F61110) above. For better controlled application, coverage and continuous use of these canisters by a tradesman, the gun & conversion kit is recommended. One time users are fine with the way it comes and don't need to order the dispensing gun. Typical Applications: • Air Sealing in New Construction and Retrofit • Filling gaps around pipes • Filling cracks & voids • Any application where you would use a lot of canned straw foam | P40540 260 oz. Approx. Yield - Bead Size | 1/4" | 3/8" | 1/2' | | 31,347 ft. | 13,914 ft. | 7,827 ft. | Call for Pricing |